Lowline Tile Vent

Permits entry of air into the roof space for cross flow ventilation or for use with mechanical extraction
For passive Stack ventilation: Conforms to BS:5925:1991 & building regulations approved document F1:2010
For use as a Soil vent application: Conforms to BS:12056-2:2000
Designed to be unobtrusive – the tile simply integrates with standard Envirotile
10,000 mm² free air flow
For roof installation above a pitch of 22.5⁰ degrees
5 mm continuous opening – install at 2.0 m apart subject to pitch requirements
10 mm continuous opening – install at 1.0 m
10Pa 54m3/hr (15 litres /sec)
42Pa 108m3/hr (30 litres/sec)
162Pa 216m3/hr (60 litres/sec)

Anthracite: GSPLLV10/1

Terracotta: GSPLLV10/4

Grey: GSPLLV10/2
Slate Grey: GSPLLV10/S

Brown: GSPLLV10/3

Product Information

Permits entry of air into the roof space for cross flow ventilation or for use with mechanical extraction

For roof ventilation: Conforms to the requirements of BS:5250 & BS:5534-2014 & the building regulations approved document F2:2010 & NHBC recommendations

For passive Stack ventilation: Conforms to BS:5925:1991 & building regulations approved document F1:2010
For use as a Soil vent application: Conforms to BS:12056-2:2000

Envirotile ventilated roof tile products comply with relevant British standard requirements & NHBC Regulations

Designed to be unobtrusive – the tile simply integrates with standard Envirotile
Supplied exclusive for Envirotile use in any of our dedicated colour range
10,000 mm² free air flow
For roof installation above a pitch of 22.5⁰ degrees

Recommended spacing requirements for correct airflow of ventilation area of

5 mm continuous opening – install at 2.0 m apart subject to pitch requirements
10 mm continuous opening – install at 1.0 m

Airflow Resistance when used as an extract terminal

10Pa 54m3/hr (15 litres /sec)
42Pa 108m3/hr (30 litres/sec)
162Pa 216m3/hr (60 litres/sec)

N.B. Ventilation must comply to BS:5250-2002. Ventilation methods vary and are determined by type of property and roof type applications.

Return & Refund Policy

The Company may at its sole discretion allow the Customer to return excess stock of goods it holds so long as any request for a return is made by the Customer within 30 days from the date of delivery of the Goods.

Goods will only be accepted for return if the following conditions are met: -

(a) the Customer contacts the Company prior to returning the Goods and receives written authority for the return/ from the Company;

(b) the Goods are not defective;

(c) the Goods are returned in their original packaging. For the avoidance of doubt, the Company will not accept the return of any loose Goods;

(d) the Goods are in resalable condition;

(e) the Customer bears the cost of the return.

Any Goods which have been accepted for return by the Company are to be returned to the Company at the Customer’s expense and will be subject to a restocking charge.

The Company reserves the right to reject any Goods returned which do not meet all of the conditions set out above and any such Goods will be returned to the Customer at the Customer’s expense.

Any refund due to the Customer will be paid to the Customer less a restocking charge within 30 days of the Company receiving the returned Goods.

Shipping Information

Due to the weight and size of our deliveries shipping costs can vary depending on postcode. Please get in touch with us regarding any purchase so we can provide an accurate quote including current delivery rates.